TURNING INSERTS | POSITIVE RAKE
TCGX-AL
Precision Ground, High Positive, polished triangular inserts for turning and boring of Aluminum, non-ferrous materials and non- metallics. AL: Extremely high 25° positive rake geometry. Super sharp edgeline with polished face for smooth chip flow.
60º
d
r
7º
s
l
CUTTING DATA (INCH)
DIMENSIONS (INCH)
NON-FERROUS
ANSI DESIGNATION
ISO DESIGNATION
feed per rev, f n
d l
s
r depth of cut, a p
N425
NA425
TCGX 1.8(1.5)1-AL
TCGX 090204-AL 7/32 .379 3/32 1/64 .016 - .094 .004 - .008
DPL100401
DPL100402
TCGX 2(1.5)0.5-AL
TCGX 110202-AL 1/4 .433 3/32 .008 .010 - .094 .002 - .008
DPL100403
DPL100404
TCGX 2(1.5)1-AL
TCGX 110204-AL 1/4 .433 3/32 1/64 .016 - .125 .004 - .010
DPL100405
DPL100406
TCGX 2(1.5)2-AL
TCGX 110208-AL 1/4 .433 3/32 1/32 .020 - .125 .006 - .020
DPL100407
DPL100408
TCGX 3(2.5)0.5-AL
TCGX 16T302-AL 3/8 .650 5/32 .008 .010 - .125 .002 - .008
DPL100409
DPL100410
TCGX 3(2.5)1-AL
TCGX 16T304-AL 3/8 .650 5/32 1/64 .016 - .156 .004 - .010
DPL100411
DPL100412
TCGX 3(2.5)2-AL
TCGX 16T308-AL 3/8 .650 5/32 1/32 .020 - .156 .006 - .020
DPL100413
DPL100414
Ordering Example: 20 pcs TCGX 3(2.5)2-AL N425; DPL100413
REFERENCE PAGES
4
38 TECHNICAL INFORMATION
63
CUTTING SPEED RECOMMENDATIONS
GRADE SELECTION
61
Powered by FlippingBook