TURNING INSERTS | POSITIVE RAKE
SCMT-MM
Generally used for semi-finishing operations: turning, facing or boring. Positive rake screw-down style inserts. Good economy with 4 cutting edges. MM: Ultra-sharp cutting edge geometry for finishing and semi-finishing operations. Low cutting forces and superior workpiece surface finish.
d
7º
r
s
l
CUTTING DATA (INCH)
DIMENSIONS (INCH)
STEEL
ANSI DESIGNATION
ISO DESIGNATION
feed per rev, f n
d l
s
r depth of cut, a p
P105
P115
P125
SCMT 3(2.5)2-MM SCMT 09T308-MM 3/8 .375 5/32 1/32 .004 - .062 .003 - .008
DPL100301 DPL100302 DPL100303
Ordering Example: 20 pcs SCMT 3(2.5)2-MM P125; DPL100303
SCMT-MM
Generally used for semi-finishing operations: turning, facing or boring. Positive rake screw-down style inserts. Good economy with 4 cutting edges. MM: Ultra-sharp cutting edge geometry for finishing and semi-finishing operations. Low cutting forces and superior workpiece surface finish.
d
7º
r
s
l
CUTTING DATA (INCH)
DIMENSIONS (INCH)
M
S
M
ANSI DESIGNATION
ISO DESIGNATION
MULTI-MATERIAL S515
feed per rev, f n
d l
s
r depth of cut, a p
M225
SCMT 3(2.5)2-MM SCMT 09T308-MM 3/8 .375 5/32 1/32 .004 - .062 .003 - .008
DPL100304
DPL100172
Ordering Example: 20 pcs SCMT 3(2.5)2-MM S515; DPL100304 NOTE: The primary application area for grade S515 is in stainless steel workpiece materials. S515 is also suitable for use with iron-based, cobalt-based and nickel-based Heat Resistant Super Alloys.
REFERENCE PAGES
4
38 TECHNICAL INFORMATION
63
CUTTING SPEED RECOMMENDATIONS
GRADE SELECTION
49
Powered by FlippingBook