ZERO POINT CLAMPING SYSTEM
All components are of stainless steel or steel with corrosion protection. Only 5.5 bar (87 psi) air pressure is required to release the clamping studs. THE CENTER PIECE
Centered clamping with zero play in the hardened steel cone.
Radial springs mounted in nitrile butadiene rubber.
Clamping pot housing
Non-wearing technology Clamping plates provide the necessary clamping force.
Locking unit
Compressed air connection for release
Cover
Simple access Low weight. Installed height from 36 mm (1.4 inch). Base plate of surface treated high-tensile aluminium.
847-367-4800 | lyndexnikken.com
6
Powered by FlippingBook