ZERO POINT CLAMPING SYSTEM
4-CHANNEL CONTROL - FLEXIBILITY IN EVERY SITUATION
Auto
< 0,0025 mm
The 4-channel control enables the monitoring and operation of the first and second level (see illustration). The support of the component/clamping device can thus be monitored at any time via the dynamic pressure and the clamping devices can be operated using the compressed air. Ideal for the zero point clamping system, from manual up to fully automated operation. Note: Unused 4-channel clamping pots require special protection against dirt and chips.
Part No.
WH-ZP120-STD-AUTO WH-ZP120-INDX-AUTO WH-ZP138-STD-AUTO WH-ZP138-INDX-AUTO
Ø 120 mm (4.7 inch) with orientation
Ø 138 mm (5.4 inch) with orientation 40 kN (9000 lbf)
Version
Ø 120 mm (4.7 inch)
Ø 138 mm (5.4 inch)
Clamping force 25 kN (5500 lbf)
25 kN (5500 lbf) 1.70 kg (3.75 lbs)
40 kN (9000 lbf) 2.92 kg (6.44 lbf)
Weight
1.78 kg (3.92 lbs)
2.79 kg (6.15 lbf)
Variant 1: Extension base Opening and discharging via compressed air, as well as dynamic pressure monitoring.
Variant 2: Pneumatic drive Opening and closing via compressed air. Variant 3: Conventional Clamping and monitoring of fixtures and components on the base unit.
Level 2 Level 1
Opening the clamping pots on level 1 Monitoring and discharging on level 1
Compressed air feed for level 2 for operation or special function function Compressed air feed for level 2 for operation or special function
847-367-4800 | lyndexnikken.com
16
Powered by FlippingBook