ZERO POINT CLAMPING SYSTEM
CLAMPING POT Ø 138 MM (5.4 INCH)
Ø138
M 12 18k6
M 16 18k6
M 16 25k6
M 10 25k6
M 10 12k6
H: 33
< 0,0025 mm
40 kN
Application: For direct clamping of components or clamping fixtures. Scope of supply: Clamping pot, 6 screws for attachment, 3 dowel pins (only for indexed clamping pots), O-rings and compressed air feed nipples. Note: We recommend the use of dust caps WH-ZP138-ACC-CAP for the securing screws. This prevents the accumulation of dirt. Available with optional compressed air feed/monitoring (see page 15 onward).
Part No. Version
WH-ZP138-STD WH-ZP138-INDX
without orientation
with orientation 40 kN (9000 lbf) 2.67 kg (5.89 lbs)
DUST CAPS
Clamping force 40 kN (9000 lbf)
Part No.
Description
Weight
2.74 kg (6.04 lbs)
Dust cap set 50 units
WH-ZP138-ACC-CAP
Application: For clamping components or fixtures in the clamping pot Ø 138 mm (5.4 inch). Scope of supply: Clamping studs and grub screws. CLAMPING STUD FOR POT Ø 138 MM (5.4 INCH)
Part No. WH-ZP138-STUD-12M10 WH-ZP138-STUD-18M12 WH-ZP138-STUD-18M16 WH-ZP138-STUD-25M16 WH-ZP138-STUD-25M10 Size 12M10 18M12 18M16 25M16 25M10 Fit 12k6 18k6 18k6 25k6 25h6 Thread M10 M12 M16 M16 M10
Application: For unused clamping pots Ø 138 mm (5.4 inch), to protect them against chips and dirt. If clamping pots are not required, they must be fitted with a closure stud. CLOSURE STUD FOR POT Ø 138 MM (5.4 INCH)
Part No.
WH-ZP138-SSTUD-H
WH-ZP138-SSTUD-V
lyndexnikken.com | 847-367-4800
13
Powered by FlippingBook