ZERO POINT CLAMPING SYSTEM
CLAMPING POT Ø 120 MM (4.7 INCH)
Ø120
M 10 12k6
M 8 16k6
M 10 16k6
M 12 18k6
M 16 18k6
H: 28
< 0,0025 mm
25 kN
Application: For direct clamping of components or clamping fixtures. Scope of supply: Clamping pot, 6 screws for attachment, 3 dowel pins (only for indexed clamping pots), O-rings and compressed air feed nipples. Note: We recommend the use of dust caps WH-ZP120-ACC-CAP for the securing screws. This prevents the accumulation of dirt. Available with optional compressed air feed/monitoring (see page 15 onward).
Part No. Version
WH-ZP120-STD WH-ZP120-INDX
without orientation
with orientation 25 kN (5500 lbf) 1.80 kg (3.97 lbs)
DUST CAPS
Clamping force 25 kN (5500 lbf)
Part No.
Description
Weight
1.84 kg (4.06 lbs)
WH-ZP120-ACC-CAP
Dust cap set 50 units
Application: For clamping components or fixtures in the clamping pot Ø 120 mm (4.7 inch). Scope of supply: Clamping studs and grub screws. CLAMPING STUD FOR POT Ø 120 MM (4.7 INCH)
WH-ZP120-STUD-12M10 WH-ZP120-STUD-16M10 WH-ZP120-STUD-18M12 WH-ZP120-STUD-18M16
Part No.
Size
12M10
16M10
18M12
18M16
Fit
12k6 M10
16k6 M10
18k6 M12
18k6 M16
Thread
Application: For unused clamping pots Ø 120 mm (4.7 inch), to protect them against chips and dirt. If clamping pots are not required, they must be fitted with a closure stud. CLOSURE STUD FOR POT Ø 120 MM (4.7 INCH)
Part No.
WH-ZP120-SSTUD-H
WH-ZP120-SSTUD-V
847-367-4800 | lyndexnikken.com
12
Powered by FlippingBook