ZERO POINT CLAMPING SYSTEM
CLAMPING POT Ø 90 MM (3.5 INCH)
Ø90
M 10 12k6
M 12 14k6
H: 22
< 0,0025 mm
12.5 kN
Application: For direct clamping of components or clamping fixtures. Scope of supply: Clamping pot, 8 screws for attachment, 3 dowel pins (only for indexed clamping pots), O-rings and compressed air feed nipples. Note: We recommend the use of dust caps WH-ZP90-ACC-CAP for the securing screws. This prevents the accumulation of dirt.
Part No. Version
WH-ZP90-STD WH-ZP90-INDX
without orientation
with orientation 12.5 kN (2800 lbf) 0.71 kg (1.57 lbs)
DUST CAPS
Clamping force 12.5 kN (2800 lbf)
Part No.
Description
Weight
0.72 kg (1.59 lbs)
WH-ZP90-ACC-CAP
Dust cap set 50 units
Application: For clamping components or fixtures in the clamping pot Ø 90 mm (3.5 inch). Scope of supply: Clamping studs and grub screws. CLAMPING STUD FOR POT Ø 90 MM (3.5 INCH)
Part No.
WH-ZP90-STUD-12M10 WH-ZP90-STUD-14M12
Size
12M10
14M12
Fit
12k6 M10
14k6 M12
Thread
Application: For unused clamping pots Ø 90 mm (3.5 inch), to protect them against chips and dirt. If clamping pots are not required, they must be fitted with a closure stud. CLOSURE STUD FOR POT Ø 90 MM (3.5 INCH)
Part No.
WH-ZP90-SSTUD-H
WH-ZP90-SSTUD-V
lyndexnikken.com | 847-367-4800
11
Powered by FlippingBook