ACCESSORIES
POINTFINDER™ Locate the precise relative positioning of the workpiece to the spindle
FEATURES Advanced Conductive Detection System
PointFinder™ is an all-in-one replacement for primary axis setters, calipers, and depth and centering gauges. Not only is it quick and easy to use, its accuracy is beyond compare. Simply load it into a toolholder and mount it into the machine’s spindle. Gauge length pre-setting is unnecessary for X- or Y-axis coordinate determination. Move PointFinder slowly along either the X- or Y-axis toward the workpiece. Its bright LED flashes at the exact point where its 1/4” diameter probe touches the workpiece’s surface. That point is exactly 1/8” away from spindle center. Z-axis coordinate determination requires pre-setting, and the point of probe contact marks the exact Z-axis coordinate. With the workpiece locked into position, your other measurements are performed with the same ease and speed.
• Instant LED response • Direct action–no relays • Works with all metals • Unaffected by cutting oil Precise • Position detection accuracy: +/- 0.0008” • Stylus recovery accuracy: +/- 0.0008” • Stylus to shank concentricity: +/- 0.0004” Overrun Protected • X-axis and Y-axis: 0.400” • Z-axis: 0.200” Versatile Design • Convenient 1” straight shank configuration • Projects 4.40” from holder when fully loaded Hardened, Precision Ground Steel Construction Easy to Use • Measure without calipers • Set depths, find centers without gauges • Position your workpiece without primary axis setters Time Saver • Turn expensive setup time into profit-making production time
Part Number
Description
PF-2
PointFinder™ with 2" Stylus
PF-STYLUS-2
Replacement Stylus for PointFinder™ PF-2
276
847-367-4800
Powered by FlippingBook