TG/DA COLLET CHUCKS
100TG COLLETS TG standard collets collapse approximately 1/64 "
METRIC Size Range: 3mm - 26mm Part Number
METRIC - COOLANT-THRU Size Range: 6mm - 26mm Part Number Size - - - - - - 100-206(C) 6mm 100-208(C) 8mm 100-210(C) 10mm 100-212(C) 12mm 100-214(C) 14mm 100-216(C) 16mm 100-218(C) 18mm 100-220(C) 20mm 100-222(C) 22mm 100-224(C) 24mm 100-225(C) 25mm 100-226(C) 26mm
Size 3mm 4mm 5mm 6mm 7mm 8mm 10mm 11mm 12mm 13mm 14mm 16mm 18mm 19mm 20mm 22mm 24mm 25mm 26mm
100-203 100-204 100-205 100-206 100-207 100-208 100-210 100-211 100-212 100-213 100-214 100-216 100-218 100-219 100-220 100-222 100-224 100-225 100-226
100TG Collet
100TG Collet - Coolant-Thru
Notes: • Cutter must be inserted the full length of the collet. • Our coolant collets seal up to a maximum coolant pressure of 1000 psi. • Range collapsibility is 0.004 - 0.006” for coolant collet. • See dimensional data for TG Collets on page 235.
Our coolant collets are designed for use with cylindrical shank tools (no flats). Cutting tool should be inserted the full length of the collet. If these conditions are not met, coolant leakage will result. Coolant collets are steel sealed and mechanically sealed by design.
D
DIMENSIONAL DATA Style D D1
Collet Range 3/64-3/4"
Nut Tightening Torque
L
75TG 100TG
1.063" 1.278"
0.871" 1.121"
1.844" 2.386"
55 ft.lbs 75 ft.lbs
L
3/64-1"
Notes: • Tolerance: Guaranteed to be within 0.0002” at the collet nose. • Accuracy: Less than 0.0005” at 4 x D.
8° D1
235
lyndexnikken.com
Powered by FlippingBook