TAP HOLDERS
TAP COLLETS TORQUE CONTROL TAP COLLETS - ANSI STANDARD -SLOTTED Slotted collets are designed for use with standard taps for coolant along the flute. Adjustable torque - see preset torque tables on page 226.
Part Number
System Tap Size Tap Shank ø Drive Square
COOLANT FLOW
T05-006(S) T05-008(S) T05-010(S) T05-012(S) T05-016(S) T05-020(S) T05-024(S) T05-028(S) T05-032(S) T05-036(S) T10-020(S) T10-024(S) T10-028(S) T10-032(S) T10-036(S) T10-040(S) T10-044(S) T10-048(S) T10-052(S) T10-056(S) T10-064(S)* T15-052(S) T15-056(S) T15-060(S) T15-064(S) T15-072(S) T15-080(S) T15-088(S)
#1 #1 #1 #1 #1 #1 #1 #1 #1 #1 #2 #2 #2 #2 #2 #2 #2 #2 #2 #2 #2 #3 #3 #3 #3 #3 #3 #3
#0-6
0.141" 0.168" 0.194" 0.220" 0.255" 0.318" 0.381" 0.323" 0.367" 0.429" 0.318" 0.381" 0.323" 0.367" 0.429" 0.480" 0.542" 0.590" 0.652" 0.697" 0.800" 0.652" 0.697" 0.760" 0.800" 0.896" 1.021" 1.108"
0.110" 0.131" 0.152" 0.165" 0.191" 0.238" 0.286" 0.242" 0.275" 0.322" 0.238" 0.286" 0.242" 0.275" 0.322" 0.360" 0.406" 0.442" 0.489" 0.523" 0.600" 0.489" 0.523" 0.570" 0.600" 0.672" 0.766" 0.831"
#8
#10 #12 1/4"
5/16" 3/8" 7/16" 9/16" 5/16" 3/8" 1/2" 7/16" 1/2" 9/16" 5/8" 11/16"
D1
DIMENSIONAL DATA System L D1 D2 #1 0.98" 1.28" 0.75" #2 1.34" 1.99" 1.22" #3 1.77" 2.83" 1.89"
L
3/4"
D2
13/16"
7/8"
1"
13/16"
7/8"
15/16"
1"
1-1/8" 1-1/4" 1-3/8"
Note: • *The tap is held with set screws. • See pages 224-225 for details about dimensions cross over for ANSI, DIN, ISO, JIS Specification Taps.
Tap Spanner Wrench Page 222
217
lyndexnikken.com
Powered by FlippingBook