SHELL MILL HOLDERS
TAPER PLUS CAT - SHELL MILL HOLDERS
• Outstanding runout accuracy for longer tool life • Vibration dampening for increased productivity • High rigidity for smooth and stable cutting • Interchangeable between standard and dual face contact spindles • 53% more surface area contact than just the taper alone Taper Plus Advantages
Taper Plus Standard Standard
D
TAPER PLUS - CAT40 - INCH Part Number d L
D L1
Key Size Arbor Thread
d
NC4001-0500-1.75CP NC4001-0750-1.75CP NC4001-0750-4.00CP NC4001-1000-1.75CP NC4001-1000-4.00CP NC4001-1250-2.00CP NC4001-1250-4.00CP
1/2" 3/4" 3/4"
1.75" 1.38" 0.57" 1.75" 1.93" 0.67" 4.00" 1.93" 0.67" 1.75" 2.39" 0.67" 4.00" 2.39" 0.67"
1/4"
1/4"-28 3/8"-24 3/8"-24 1/2"-20 1/2"-20 5/8"-18 5/8"-18 3/4"-16
L L1
5/16" 5/16"
1" 1"
3/8" 3/8" 1/2" 1/2" 5/8"
1-1/4" 2.00" 2.89" 0.67" 1-1/4" 4.00" 2.89" 0.67"
NC4001-1500-2.00CP 1-1/2" 2.00" 3.80" 0.93"
D
TAPER PLUS - CAT50 - INCH Part Number d L
D L1
Key Size Arbor Thread
d
NC5001-0750-1.75CP NC5001-0750-4.00CP NC5001-0750-6.00CP NC5001-0750-8.00CP NC5001-1000-1.75CP NC5001-1000-4.00CP NC5001-1000-6.00CP NC5001-1000-8.00CP NC5001-1250-1.75CP NC5001-1250-6.00CP NC5001-1250-8.00CP
3/4" 3/4" 3/4" 3/4"
1.75" 1.93" 0.67" 4.00" 1.93" 0.67" 6.00" 1.93" 0.67" 8.00" 1.93" 0.67" 1.75" 2.39" 0.69" 4.00" 2.39" 0.69" 6.00" 2.39" 0.69" 8.00" 2.39" 0.69"
5/16" 5/16" 5/16" 5/16"
3/8"-24 3/8"-24 3/8"-24 3/8"-24 1/2"-20 1/2"-20 1/2"-20 1/2"-20 5/8"-18 5/8"-18 5/8"-18 3/4"-16 3/4"-16 3/4"-16 3/4"-16
L L1
1" 1" 1" 1"
3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" 5/8" 5/8" 5/8" 5/8" 3/4"
1-1/4" 1.75" 2.89" 0.69" 1-1/4" 6.00" 3.80" 0.69" 1-1/4" 8.00" 3.80" 0.69"
NC5001-1500-2.00CP 1-1/2" 2.00" 3.80" 0.93" NC5001-1500-4.00CP 1-1/2" 4.00" 3.80" 0.93" NC5001-1500-6.00CP 1-1/2" 6.00" 3.80" 0.93" NC5001-1500-8.00CP 1-1/2" 8.00" 3.80" 0.93"
NC5001-2000-2.00CP
2"
2.00" 4.39" 0.93"
1"-14
Replacement Keys Page 188
Replacement Arbor Screws Page 188
179
lyndexnikken.com
Powered by FlippingBook