SHRINK FIT
SHRINK FIT HOLDER ACCESSORIES
COOLANT TUBES FOR HSK/POLYGON HOLDERS Part Number Description HSK63-TUBE Coolant Tube for HSK63 holder HSK100-TUBE Coolant Tube for HSK100 holder C4-TUBE C4 Coolant Tube C5-TUBE C5 Coolant Tube C6-TUBE C6 Coolant Tube C8-TUBE C8 Coolant Tube Note: Coolant tube wrenches are needed to remove or install coolant tubes in HSK/Polygon Shrink Fit toolholders. COOLANT TUBE WRENCHES FOR HSK/POLYGON HOLDERS Part Number Description HSK63-WRENCH Wrench for HSK63 Coolant Tube HSK100-WRENCH Wrench for HSK100 Coolant Tube C4-WRENCH Wrench for C4 Coolant Tube C5-WRENCH Wrench for C5 Coolant Tube C6-WRENCH Wrench for C6 Coolant Tube C8-WRENCH Wrench for C8 Coolant Tube
WHY EVERY HSK TOOLHOLDER SHOULD HAVE A COOLANT TUBE INSTALLED
Without the Coolant Tube connected and sealed to contain them, contaminants can back-flow through collet gaps. These contaminants can flood the HSK chamber and cause damage to the clamping mechanism. They can also travel
The Coolant Tube is connected and sealed with the Spindle Coolant Nozzle for Thru- Spindle Coolant (TSC) application.
With the Coolant Tube connected and sealed with the Spindle Coolant Nozzle, back-flow contaminants are contained.
higher and can damage other parts like spindle bearings.
Therefore - it is recommended that every HSK Holder have a coolant tube installed, regardless if Thru-Spindle Coolant is utilized or not. Contact your local Lyndex-Nikken representatives for information regarding special pricing or replacement coolant tubes.
130
847-367-4800
Powered by FlippingBook