Specialized Indicators
Calculation-Type Digimatic Indicator ID-C † Calculation-type Digimatic Indicator features both a key lock and parameter lock. † Fast measurement frequency up to 50 per second.
† Improved parameter setting software makes it even easier to set all of the available parameters to determine and upload the proper coefficients for calculation. (optional) 21EZA313
† An analog bar provides easy-to-read values when scanning for Max, Min and TIR Values. † The ABSOLUTE Digimatic indicator performs internal calculations using the formula Ax+B+Cx-1 (assuming spindle displacement as x), while the specified coefficients A, B and C can be set with respect to the purpose of measurement or dimensions of the fixtures. This unique feature allows for reading measurements directly without searching for conversions.
543-342B-10
Data Management Software by Mitutoyo ENABLED
Custom fixture shown
Order No.
Resolution
Range
Accuracy
Measuring Force List
Promo
.00005/.0001/.0005” (0.001/0.01mm) Selectable
543-342B-10
$547.20
.5"/12.7mm ±.00010"/0.003mm 1.5N or less
$576.00
Stem dia. 3/8" #4-48 UNF Thread
SPC cable – 1m: 905338 2m: 905409
Bore Gage ABSOLUTE Digimatic Indicator ID-C
† Hold automatically picks up hole diameter after a sweep. † Bore Gage Digimatic Indicator features both a key lock and parameter lock. † Fast measurement frequency up to 50 per second. † Analog bar provides easy-to-read values when scanning for Max, Min and TIR values. † Up to three sets of master values and upper/lower tolerance values can be stored.
† Go/No-go judgment † Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle ABSOLUTE Position from the origin at power-on. † Improved parameter setting software makes it even easier to set all of the available parameters to determine and upload the proper coefficients for calculation. (optional) 21EZA313
543-312B-10
Data Management Software by Mitutoyo ENABLED
Measuring Force
Installed on optional bore gage probe (page 12)
Order No.
Resolution
Range
Accuracy
List
Promo
.00005/.0001/.0005” (0.001/0.01mm) Selectable
543-312B-10
$547.20
.5"/12.7mm ±.00010"/0.003mm 1.5N or less
$576.00
SPC cable – 1m: 905338 2m: 905409
Peak Hold ABSOLUTE Digimatic Indicator ID-C With Max./Min. Value Holding Function † Peak Hold Digimatic Indicator features both a Key Lock and Parameter Lock. † An analog bar provides easy-to-read values when scanning for Max, Min and TIR Values. † Go/No-go judgment † The maximum, minimum or runout value can be displayed during measurement.
† Fast measurement frequency up to 50 per second. † Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle ABSOLUTE Position from the origin at power-on. † Improved parameter setting software makes it even easier to set all of the available parameters and then determine and upload the proper coefficients for calculation. (optional) 21EZA313
543-302B-10
Order No.
Resolution
Range
Accuracy
Remarks
List
Promo
Stem dia. 3/8", #4-48 UNF Thread 543-302-10
.00005/.0001/.0005" 0.001/0.01mm Selectable
$547.20
.5"/12.7mm ±.00010"/0.003mm w/lug
$576.00
543-302B-10
$547.20
.5"/12.7mm ±.00010"/0.003mm Flat-back
$576.00
Data Management Software by Mitutoyo ENABLED
SPC cable – 1m: 905338 2m: 905409
Prices effective October 1 through December 23, 2025
14
Powered by FlippingBook