Fall Promo 2025 DGI USA

1-800-923-6255 www.dgisupply.com

Small Tool Instruments and Data Management

Form Measurement

Digital Scales and DRO Systems

Optical Measurement

Sensor Systems

Test Equipment

Vision Measuring Systems

FALL PROMO 2025 PRECISION TOOLS & INSTRUMENTS Effective October 1 through December 23

Save up to an additional 20 % OFF with DGI Supply

Bulletin No. 2387

NEW FEATURED

PRODUCTS

Dear Valued Customers, I want to thank you for your continued support of the Mitutoyo product and our team members in operations around the world. This has been a busy and interesting year for all of us at Mitutoyo America. We have worked closely with our factory and development staff to continue to expand our product lineup and overall capability with new products and enhancements to some tools that have been a part of our brand for many years. In addition, in the United States we have continued to expand programs to provide support and resources to you, your team and the supply chain we all depend on. One example of these programs is our educational content that will help you support new employees or skill development for existing staff when new challenges are faced. You will find access to these programs from our main website (Mitutoyo.com). Look under the “Services” tab and then click on “Training & Education.” While on the website, you may also look up our calibration and repair programs. You may be surprised to also find new services offered such as contract inspection and contract part programming. I hope that you explore these programs and reach out to one of the Mitutoyo Sales Representatives or valued distributor partners for more information. The 2025 Mitutoyo Fall Promotion discounts on the most commonly used tools and instruments you will find in shops all around the country. We hope this promotion will support your year-end and future needs with valuable packages and discounts. Once again, I thank you for your continued support of Mitutoyo-made measuring solutions. Sincerely,

TABLE OF CONTENTS

MDE QuantuMike.........................................5 The new MDE QuantuMike delivers faster measurements - up to 4x faster than standard micrometers - with exceptional accuracy (±1 μm permissible error), an IP65 protection rating, and a user-friendly design with enhanced display. ID-C/ID-F Digimatic Indicators...................10 These new Digimatic Indicators have higher resolutions down to 20μinch/0.5 μm, a built-in calibration date warning and analog bar on the larger LCD display, and new S1 Digimatic output capabilities. Dial Test Indicators.....................................13 Mitutoyo test indicators provide enhanced durability, sensitivity, usability, readability, and most importantly, incredible accuracy. Mitutoyo offers a range of different types of test indicators along with accessories and sets for any application and industry. Profile Projectors........................................20 Mitutoyo profile projectors provide some of the most accurate and clear images on the market. Easily capture accurate measurements without blurring, distortion or complex calculations using our modular 2D digital readouts. Surftest SJ-220............................................24 Highly versatile surface roughness instruments, including portable models, are full of features and capabilities. Mitutoyo surface roughness testers deliver precise and accurate measurements. LH-600F Linear Height Gages.....................26 The Mitutoyo LH-600F Linear Height Gage is the latest model in the Mitutoyo Linear Height Gage line with several new features like an adjustable and rotatable display, intuitive touchscreen interface, and added output options for even easier, highly accurate 1D and 2D dimensional measurements.

Calipers/Caliper Checker.............3 QuantuMike................................. 5 Micrometers................................. 6 Tool Kits ......................................8 Indicators ..................................10 Dial Indicators...........................12 Bore Gages.................................12 Dial Test Indicators....................13 Specialized Indicators...............14 Borematic................................... 15 Holtest........................................ 16 U-WAVE Wireless & Bluetooth ® Data Transmitters......................18 Digital Profile Projectors..........20 Quick Image...............................22 Surftest SJ-220 Packages..........24 LH-600F Height Gage.................26 QM Height Gage........................28 Hardness Testers........................30 Microscopes............................... 34

Matt Dye President, Mitutoyo America Corporation

Calipers / Caliper Checker

† Main scale jaw can slide up and down to facilitate measurement of stepped sections. (Hard-to-reach dimensions such as A, B, C can be accurately measured). † With depth bar. † With SPC data output. Offset Caliper A B C

Digimatic Calipers † AOS Electromagnetic inductive sensor improves environmental resistance against dirt, water and oil. † A battery life of approximately 3.5 years has been achieved under normal use through the adoption of the Mitutoyo ABSOLUTE scale. † The slider configuration features an ergonomic, thumb-friendly shape.

† Step-measurement capable. † The data output function allows integration into Statistical Process Control and measurement systems. † Display character height: 9mm. † AOS applies to 4", 6" and 8" models. † Resolution: .0005”/0.01mm.

573-701-20

Data Management Software by Mitutoyo ENABLED

Order No. Accuracy Resolution List Promo 573-701-20 0 - 6" / 0 - 150mm ±.001" .0005” / 0.01mm $603.00 $572.85 573-702-20 0 - 8" / 0 - 200mm ±.001" .0005” / 0.01mm $691.00 $656.45 573-704-20 0 - 12" / 0 - 300mm ±.0015" .0005” / 0.01mm $925.00 $878.75 Range

500-171-30

AOS: Advanced Onsite Sensor

Order No.

Range

Remarks

List

Promo

U-WAVE-Fit compatible

SPC cable with data switch – 1m: 05CZA624 2m: 05CZA625

No SPC Output Style 500-195-30

† Narrow tip jaws fit into very small grooves and tracks, making many previously difficult outside measurements easier to achieve. † With depth bar. † With SPC data output. Point Caliper

$177.65 $191.90 $277.40 $555.75 $211.85 $225.15 $296.40 $648.85 $1,007.00 $1,111.50 $2,147.00

0-4”/0-100mm .075” Round Depth Bar $187.00

500-196-30 500-197-30 500-193-30

0-6"/0-150mm 0-8"/0-200mm 0-12"/0-300mm

$202.00 $292.00 $585.00

With SPC Output Style 500-170-30

0-4”/0-100mm .075” Round Depth Bar $223.00

500-171-30 500-172-30 500-173-30 500-505-10 500-506-10

0-6”/0-150mm 0-8”/0-200mm 0-12”/0-300mm

$237.00 $312.00 $683.00

Random point-to-point dimensions

573-721-20

0-18”/0-450mm Without Thumb Roller $1,060.00 0-24”/0-600mm Without Thumb Roller $1,170.00

Data Management Software by Mitutoyo ENABLED

500-507-10 0-40”/0-1000mm Without Thumb Roller $2,260.00

Order No. Promo 573-721-20 0 - 6" / 0 - 150mm ±.001" .0005” / 0.01mm $527.00 $500.65 573-725-20* 0 - 6" / 0 - 150mm ±.001" .0005” / 0.01mm $656.00 $623.20 Range Accuracy Resolution List

U-WAVE-Fit compatible

SPC cable with data switch – 1m: 959149 2m: 959150

Order Numbers are subject to change, e.g. 500-196-30 will change to 500-196-32

SPC cable with data switch – 1m: 05CZA624 2m: 05CZA625

U-WAVE-Fit compatible

* Extended tips

Dial Caliper † Smooth sliding with high shock protection. † Lock screw for dial bezel and for holding the sliding jaw position. † Can measure OD, ID, depth and steps. † Models available with carbide-tipped OD and ID jaws.

505-742-56J

† Due to the low measuring force, these calipers are ideal for elastic or resilient workpieces such as plastic parts and rubber parts that standard calipers can't measure consistently. † With SPC data output. Low-force Caliper

Order No. 505-742J 505-738 505-740J 505-743J 505-746 505-749 505-742-56J

Range

Remarks

List

Promo $155.80 $279.30 $142.50 $227.05 $345.80 $323.00 $155.80

0 -6” .100”/rev

$164.00

573-291-30

0 -6” .100”/rev Carbide-tipped jaws $294.00

0 -6” .200”/rev 0 -8” .100”/rev 0 -12” .100/rev 0 -12” .200/rev 0 -6” .100”/rev

$150.00 $239.00 $364.00 $340.00 $164.00

Data Management Software by Mitutoyo ENABLED

Order No.

Range Accuracy Resolution List

Promo

0 - 7" / 0 - 180mm

.0005” / 0.01mm

573-291-30

$1,060.00 $1,007.00

±.002"

Black Dial Face

Order Numbers are subject to change, e.g. 500-196-30 will change to 500-196-32

WWW.DGISUPPLY.COM

U-WAVE-Fit compatible

Calipers / Caliper Checker

Coolant-Proof Calipers

† Sealed housing is IP67 rated, meaning it’s resistant to the coolants, dirt, grit and chips found in many manufacturing environments. † Easy to use - no need to wipe or clean the scale. † .0005”/0.01mm resolution with ±.001” accuracy. † Automatic power On/Off. † Certificate of Inspection provided.

COMPATIBLE WITH

Data Management Software by Mitutoyo ENABLED

Order No.

Range

List

Promo

Non-Output Style 500-752-20

$257.45 $344.85 $596.60 $304.95 $384.75 $662.15

0-6”/0-150mm $271.00 0-8”/0-200mm $363.00 0-12"/0-300mm $628.00 0-6”/0-150mm $321.00 0-8”/0-200mm $405.00 0-12”/0-300mm $697.00

500-753-20 500-754-20

COOLANT PROOF is the universal term of Mitutoyo Digimatic Small Tool Instruments that are free from measurement error and physical deterioration due to routine exposure to water, cutting oil or coolant. This high performance is achieved by using encoders that are inherently immune to contamination, where exposure is inevitable, combined with comprehensive sealing techniques and extremely oil-resistant materials to guarantee a long working life under normal operating conditions.

SPC Output Style 500-762-20

500-763-20 500-764-20

* ±.0015” accuracy

SPC cable – 1m: 05CZA624 2m: 05CZA625

U-WAVE Fit compatible

Digimatic Carbon Fiber Caliper

552-314-10

† Lightweight Digimatic Calipers that employ CFRP (Carbon Fiber Reinforced Plastics) in the beam and jaws. † Highly durable and easy to handle.

† Direct readout of ID measurements from the LCD. (Offset value can be set easily by pressing the Offset key.) † Preset function for setting a desired starting point. † With SPC data output. † Special models available with ceramic jaws which are suitable for measuring abrasive and magnetic products. † Can be used in workshop conditions exposed to coolant, water, dust or oil. † Incorporates ABSOLUTE measurement system. † Automatic power On/Off.

Data Management Software by Mitutoyo ENABLED

Order No. 552-312-10 552-313-10 552-314-10 552-315-10 552-316-10

Range Accuracy Resolution

List

Promo

$1,159.00 $1,311.00 $2,337.00 $2,793.00 $4,370.00

0(.5”)-18” +/-.002” .0005”/0.01mm $1,220.00 0(.5”)-24” +/-.002” .0005”/0.01mm $1,380.00 0(1”)-40” +/-.002” .0005”/0.01mm $2,460.00 0(1”)-60” +/-.004” .0005”/0.01mm $2,940.00 0(1”)-80” +/-.005” .0005”/0.01mm $4,600.00

SPC cable – 1m: 05CZA624 2m: 05CZA625

CERA Caliper Checker

CERA Caliper Checker † Permanently wrung, high grade CERA gage blocks in a protective metal casing. † Stands perpendicular for height gage inspection. * Also includes same features as CERA Gage Blocks

20% OFF

† Extremely high wear resistance, 3x better than carbide. † Corrosion proof – no oil needed. † Closest expansion coefficient to steel. † Anti-magnetic – keeps away steel dust. CERA (Zirconia Ceramic) Gage Blocks*

† High wringing force due to high density. † Crack and burr resistant. † Low thermal conductivity – excellent dimensional stability under brief temperature changes (from handling, etc.).

Order No. Range Remarks (length to check)

List

Promo

Outside measurement: 1”, 2”, 4”, 6”, 8”, 10”, 12” Inside measurement: 1”, 2”, 4”, 6”, 8”, 10”, 12”

$5,700.00 $4,560.00

515-565

0 - 12”

Prices effective October 1 through December 23, 2025

QuantuMike

QuantuMike High-speed, high-accuracy micrometer measures 4x faster vs standard micrometers

4x Faster 1µm Accuracy

New Features

GO/NG icons

Auto-calculate

Calibration alerts

† Go/No-go icons: at-a-glance verification † Calibration date alerts: warning and due date alerts † Approach Speed Warning: reduce over-torquing † Calculation: auto-calculate corrections and more † S1 Digimatic output — send measurement to Excel or easily program features with software (ITPak 3.0 or MeasurLink ® ) † Auto power On/Off. Key customization

Forewarning

Calendar icon flashes

Displays tolerance judgment mark Tolerance judgment function: ON

Correction value can be read directly Calculation function: ON Calculates and displays correction value

Pass

Due date

Entire display flashes

− NG

+ NG

Customized key setting allows the user to easily switch between measurement values and calculation results with the press of a button.

Continued Great Features

† 4x faster spindle speed † Preset, Zero, Hold, Function Lock, Error display

† 1-pc Rachet Thimble + Speeder † Resolution: .00005” / 0.001mm † Accuracy: +/- .00005” / 0.001mm

New Digimatic S1 Output . S1 is the new Mitutoyo bidirectional output format that enables reading and writing information to the gages such as sending data, sending a zero command, calibration date warnings, and the ability to poll the serial number for smoother measurement operation. Communication supported by new Input Tools.

Comparison of time needed to measure a 6-stepped workpiece (with one hand)

■ Measuring time ■ Positioning time

Order No.

Description

List

06AGQ001A

USB INPUT TOOL DIRECT

$226.00

Standard micrometer

Total 53 sec.

12 sec.

41 sec.

Excel ® Send data directly into existing forms ITPak 3.0 Freeware

Reduced by Approx. 60%*

QuantuMike

Total 22 sec.

12 sec.

10 sec.

Read/Write Data and set Parameters MeasurLink ® 10.4

06AGQ001A

(see page 29) Data Management & SPC Software

Time [s]

*According to Mitutoyo's comparison test data

Order No.

Description

List

Promo $340.10 $388.55 $462.65 $498.75

293-180-40 293-181-40 293-182-40 293-183-40

QUANTUMIKE MICROMETER, DIGIMATIC, 0-1", IP65, .00005", W/SPC QUANTUMIKE MICROMETER, DIGIMATIC, 1-2", IP65, .00005", W/SPC QUANTUMIKE MICROMETER, DIGIMATIC, 2-3", IP65, .00005", W/SPC QUANTUMIKE MICROMETER, DIGIMATIC, 3-4", IP65, .00005", W/SPC

$358.00 $409.00 $487.00 $525.00

WWW.DGISUPPLY.COM

Micrometers

Quickmikes

The updated Quickmike series still boasts the super-fast spindle feed rate that’s 20x faster than standard micrometers. † IP65 protection – can be used around cutting fluids.

293-676-20

† MIN Hold – the minimum measurement can be held on the display for more repeatable and accurate measurements. † Larger LCD – 33% larger, 10mm character height. † Function lock – prevents accidental changes. † 5 year battery life – more operating time, less downtime looking for and replacing batteries. † Non-rotating spindle.

Order No. 293-676-20 293-677-20

Range

Resolution Accuracy

Flatness

Parallelism List

Promo $731.50 $798.00

0 - 1.2” .00005”/0.001mm ±0.0001” 0.000012” 0.00008” $770.00 1 - 2.2” .00005”/0.001mm ±0.0001” 0.000012” 0.00008” $840.00

Order Numbers are subject to change, e.g. 500-196-30 will change to 500-196-32

SPC cable with data switch – 1m: 05CZA662 2m: 05CZA663

† Provided only with zero set and in/mm (inch/metric models only) keys. † A ratchet stop or friction thimble for a constant measuring force. † Measurement readout with large characters on the LCD. † No spindle clamp. No data output. MDC-Lite Micrometer Order No. Range Resolution Remarks

List

Promo $186.20 $197.60

293-831-30

293-831-30 293-832-30

0 - 1” / 0 - 25.4mm .00005" / 0.001mm Ratchet Stop

$196.00

0 - 1” / 0 - 25.4mm .00005” / 0.001mm Friction Thimble $208.00

Order Numbers are subject to change, e.g. 500-196-30 will change to 500-196-32

Digimatic Micrometer

† New electromagnetic ABSOLUTE sensor - Improved resistance to environmental conditions such as dirt, oil and water, which can cause false readings. † New ratchet thimble on select models improves one-hand operability. † New anti-slip finish for improved grip while taking measurements. † Long battery life – 2.4 years under normal operation. † Fully compatible with existing Mitutoyo Digimatic peripherals (SPC Cables, U-WAVE wireless transmitters, DP1-VA, etc.) – SPC output-enabled IP65 models. † Function-lock system prevents inadvertent setting changes. † Certificate of Inspection provided.

293-330-30

Order No.

Range

Resolution

Remarks

List

Promo $295.45 $271.70 $271.70 $271.70 $271.70 $347.70 $299.25 $299.25 $317.30

Data Management Software by Mitutoyo ENABLED

293-330-30* 293-340-30 293-344-30 293-348-30 293-349-30 293-331-30* 293-341-30 293-345-30 293-334-30* 293-335-30* *with SPC Output

0-1”/0-25.4mm .00005”/0.001mm 0-1”/0-25.4mm .00005”/0.001mm 0-1”/0-25.4mm .00005”/0.001mm 0-1”/0-25.4mm .00005”/0.001mm

Ratchet Stop Ratchet Stop

$311.00 $286.00 $286.00 $286.00

Ratchet Thimble

Ratchet Thimble Friction Thimble

Ratchet thimble

Speeder

0-1”/0-25.4mm .0001”/0.001mm Ratchet Thimble, Tenths Reading $286.00

1-2”/25.4-50.8mm .00005”/0.001mm Ratchet Stop w/Standard 1-2”/25.4-50.8mm .00005”/0.001mm Ratchet Stop w/Standard

$366.00 $315.00

1-2”/25.4-50.8mm .00005”/0.001mm Ratchet Thimble w/Standard $315.00

0-1”/0-25.4mm .00005”/ 0.001mm 0-1”/0-25.4mm .00005”/0.001mm

Ratchet Thimble Friction Thimble

$334.00 $311.00

$295.45 SPC cable with data switch – 1m: 05CZA662 2m: 05CZA663

U-WAVE Fit compatible

Order Numbers are subject to change, e.g. 500-196-30 will change to 500-196-32

Prices effective October 1 through December 23, 2025

Micrometers

Purchase the world’s first 5µinch /0.1μm resolution micrometer and receive a USB input tool and cable (nearly $400 in value)

Using precision digital measuring tools together with a USB input tool improves both measurement results and data reliability. The high-accuracy MDH with 5 millionths resolution can output in its entirety in both inch and metric. Resulting data can input directly to Excel®, MeasurLink ® or other SPC programs.

† Range: 0-1”, Resolution: .000005”, Accuracy: +/- .000020

293-130-10

Order No.

Description

List

PROMO029A

$2,110.00

Package: MDH Mic, SPC Cable, USB Input Tool

MDH Micrometer with high accuracy, high resolution output

293-130-10

$2,110.00

05CZA662

$144.00

SPC CONNECTING CABLE (1M)

264-020

$249.00

USB INPUT TOOL

Data Management Software by Mitutoyo ENABLED

264-020

Popular Mitutoyo single-beam height gages have been redesigned to be even easier to use with larger displays, various hardware accessories, and multiple data options such as wired and wireless output, data loggers and more. ABSOLUTE Digimatic Height Gages

Shown with optional Test Indicator and mounting hardware (see page 9).

Features:

† Durable Build - Iron detector and base, steel beam and holder. † Easy to use slider feed wheel. † Multiple data equipment options. † Other improvements: twist-off battery cap, 20% larger LCD, handy Data button.

Shown with optional U-Wave Bluetooth ® transmitter (see page 28 and connector 02AZD790F)

570-412

Data Management Software by Mitutoyo ENABLED

Data Output

Max. response speed

Order No.

Range

Resolution

Functions

Drive Method

Battery Life List

Promo

570-412 570-413 570-414

$898.70

0"-12"/0mm-300mm 0"-18"/0mm-450mm 0"-24"/0mm-600mm

On/Off, Origin, Zero/ABS, Hold/ Data, inch/mm conversion"

$946.00 $1,270.00 $1,470.00

Approx. 5 Years Under Normal Use

Slider-feed Wheel (manual)

Digimatic d1

$1,206.50 $1,396.50

0.0005" / 0/01mm

Unlimited

WWW.DGISUPPLY.COM

Tool Kits

Soft Case Tool Kits Durable Protective Cases

New protective cases for your tools offer a modern alternative to our wooden cases. Versions include mechanical, standard Digimatic, or QuantuMike-based sets. QuantuMikes are just as accurate as standard Digimatic micrometers, but up to 4x faster. Empty cases are also available as a new home for your existing tools!

64PKA288A

RUGGED, IMPACT-RESISTANT BUILD

CASE MOULDS FOR DIGIMATIC AND MECHANICAL TOOLS

LONG-LIFE ZIPPERS AND STAIN- RESISTANT COVER

2X MAGNET-BACKED SLOTS FOR HOLDING STEEL RULES, SPANNERS, THUMB DRIVES AND MORE

Prices effective October 1 through December 23, 2025

Tool Kits

64PKA284

64PKA285

64PKA283

Soft Case Tool Kit Components for 64PKA283

Soft Case Tool Kit Components for 64PKA284 Soft Case Tool Kit Components for 64PKA285

Order No. Description 103-135

Order No. Description 103-177

Order No.

Description

MIC, OUTSIDE, 0-1”, 0.0001”, FRICTION THIMBLE STEEL RULE 6’’ 3R FLEXIBLE

MIC, OUTSIDE, 0-1”, 0.001”, RATCHET STOP STEEL RULE 6’’ 16R RIGID

1” RATCHET STOP MICROMETER (NO SPC) DIGIMATIC CALIPER, 6”/150MM, NO OUTPUT CASE FOR DIGIMATIC TOOL KIT

293-340-30

182-204 505-742J

182-102 505-740J

500-196-30

DIAL CALIPER, 6’’, .1”/ REV 64PMT183 CASE FOR MECHANICAL TOOL KIT

DIAL CALIPER, 6’’, .2”/ REV 64PMT183 CASE FOR MECHANICAL TOOL KIT

64PMT182

64PKA286

64PKA288A

Soft Case Tool Kit Components for 64PKA286

Soft Case Tool Kit Components for 64PKA288A

Order No. 293-348-30 500-196-30

Description

Order No.

Description

QUANTUMIKE MICROMETER, DIGIMATIC, 0-1”, IP65, .00005”, W/ SPC DIGIMATIC CALIPER, 6”/150MM, W/ OUTPUT

1” FRICTION THIMBLE MICROMETER (NO SPC) DIGIMATIC CALIPER, 6”/150MM, NO OUTPUT

293-180-40

500-171-30 64PMT182

64PMT182

CASE FOR DIGIMATIC TOOL KIT

Soft Case Tool Packages

Order No. 64PKA283 64PKA284 64PKA285 64PKA286 64PKA288A

Description

List

Promo $383.80 $331.55 $489.25 $489.25 $553.85

TOOL PKG, MECHANICAL, INCH, W/ 6" DIAL CALIPER, 1" OUTSIDE MIC, 6" STEEL RULE, CASE TOOL PKG, MECHANICAL, INCH, W/ 6" DIAL CALIPER, 1" MIC, 6" STEEL RULE, CASE TOOL PKG, DIGIMATIC, INCH, W/ 1" MIC (RATCHET STOP TYPE), 6" CALIPER, CASE TOOL PKG, DIGIMATIC, INCH, W/ 1" MIC (FRICTION THIMBLE TYPE), 6" CALIPER, CASE TOOL PKG, DIGIMATIC, INCH, W/1" QUANTUMIKE, 6" CALIPER, CASE, WITH OUTPUT

$404.00 $349.00 $515.00 $515.00 $583.00

Order Numbers are subject to change, e.g. 500-196-30 will change to 500-196-32

Protective Case Only

Order No. 64PMT182 64PMT183

Description

List

Promo $73.67 $76.11

CASE FOR DIGIMATIC TOOL KIT CASE FOR MECHANICAL TOOL KIT

$77.55 $80.12

WWW.DGISUPPLY.COM

Indicators

Watch how MeasurLink ® 10.4 can control gages with S1 output!

ID-C / ID-F Digimatic Indicators High-performance ABS Digimatic Indicators

Calibration period notification function

†20 µinch/0.5 μm resolution. †Large screen and analog bar. †Calibration period notification

0.5” ID-F MODEL NOW AVAILABLE

function. The LCD displays an icon to notify the user when the set calibration time approaches. This facilitates the proper precision management of ID-C/ID-F. †Simple Calculation Function.

ID-C Series

ID-F Series

†New Digimatic S1 Output*. S1 is the new Mitutoyo bidirectional output format that enables reading and writing information to the gages such as sending a zero command, TIR reset, calibration date warnings, and the ability to poll the serial

Large screen and analog bar The units have large screens that can display various information in an easy-to-read manner. They also have an analog bar, convenient for observing subtle movements such as the approach to tolerance.

number for smoother measurement operation. Communication is supported by the new Input Tool and SPC cable, see table below.

Order No. 06AGL011

Description

List

SPC DIGIMATIC Cable, TYPE S1 (1M)

$117.00 $249.00

Previous model

New model

Addition of analog bar

264-020

USB INPUT TOOL

* SPC Cable and Input Tool are both required

Excel ® Send data directly into existing forms ITPak 3.0 Freeware

ID-C

Improved analog bar

Read/Write Data and set Parameters MeasurLink ® 10.4

Character size enlarged about 1.5 times

06AGL011

264-020

(see page 29) Data Management & SPC Software

ID-F

ID-C Series - Battery Operated

Order No.

Maximum Permissible Error

Net mass (g)

Measuring for MPL (N)

Range

Resolution

Interface

List

Promo

With Lug

Flat Back

Hysteresis MPE H

Repeatability MPE r

With Lug Flat Back

MPE E

543-702 543-702B 543-707 543-707B

1.5 or less d1/d2/S1 195 165 $551.00 $523.45 0.4 to 0.7 d1/d2/S1 190 160 $861.00 $817.95

0.5" / 12.7mm 0.5" / 12.7mm 1" / 25.4mm

± 0.00012" / 0.002mm 0.00008" / 0.002mm

0.00002" / .00005" / 0.0001" / 0.0005" / 0.0005mm / 0.001mm / 0.01mm

0.00008" / 0.002mm

543-722B

195 $710.00 $674.50

1.8 or less d1/d2/S1 -

± 0.0002" / 0.005mm

543-732B

260 $924.00 $877.80

2" / 50.8mm

2.3 or less d1/d2/S1 -

543-712 543-712B 543-717 543-717B

d1/S1 190 160 $403.00 $382.85

0.5" / 12.7mm 0.5" / 12.7mm 1" / 25.4mm

0.9 or less

± 0.001" / 0.02mm 0.001" / 0.02mm

0.2 to 0.5 d1/S1 185 155 $646.00 $613.70

0.0005" / 0.01mm

543-727B

190 $591.00 $561.45

1.8 or less

d1/S1

± 0.0015" / 0.04mm

543-737B

245 $774.00 $735.30

2" / 50.8mm

2.3 or less

d1/S1

Order Numbers are subject to change, e.g. 500-196-30 will change to 500-196-32

ID-F Series - AC Powered - Green/Red Backlit Display

Order No.

Maximum Permissible Error

Measuring for MPL (N)

Range

Resolution

Interface List

Promo

Hysteresis MPE H

Repeatability MPE r

With Lug Flat Back

MPE E

543-856-A 543-856B-A 0.5” / 12.7mm

1.5 or less d1/d2/S1 $743.00 $705.85 1.8 or less d1/d2/S1 $866.00 $822.70 2.3 or less d1/d2/S1 $983.00 $933.85 2.3 or less d1/d2/S1 $1000.00 $950.00

0.005mm / 0.001mm / 0.01 mm / 0.00002" / .00005" / 0.0001" / 0.0005"/ 0.001" (selectable)

± 0.0001" / 0.0025mm

- - -

543-852A 543-854A 543-858A

1" / 25.4mm

0.00008" / 0.002mm

± 0.00016" / 0.004mm ± 0.00012" / 0.003mm

2" / 50.8mm

Prices effective October 1 through December 23, 2025

Indicators

Digimatic Indicator ID-H Remote Programming Capable

21EZA099 Remote controller (optional)

† This digital indicator offers excellent accuracy and functionality with an easy-to-read display. Take advantage of its high accuracy, backed up by 0.5µm / .00002” resolution, remote control functionality via a handheld controller (or an RS- 232C interface) and easy runout measurements

† The maximum, minimum or runout value can be displayed during measurement. † Go/No-go judgment is performed by setting the upper and lower tolerances. If a judgment result is out of tolerance, the display backlighting changes from green to red, so tolerance judgment can be made at a glance.

with the analog bar display. † With RS-232C input/output

543-564A

Stem dia. 3/8" #4-48 UNF Thread

Order No. 543-562A 543-564A

Resolution

Range

Model

Accuracy

List

Promo

$1,083.00 $1,292.00

1.2” / 30.4mm ID-H530E 0.0015mm $1,140.00 2.4” / 60.9mm ID-H560E 0.0025mm $1,360.00

.00002”, .00005”, .0001”, 0.0005mm, 0.001mm

Data Management Software by Mitutoyo ENABLED

SPC cable – 1m: 936937 2m: 965014

ABSOLUTE Digimatic Indicator ID-S † Employing the ABSOLUTE linear encoder, the ID-S always displays the spindle ABSOLUTE Position from the origin at power-on. Also, unlimited response speed eliminates overspeed errors. † Dust/water protection level: IP42 (IP53: 543-796B-10). † SPC data output

543-783B-10

Data Management Software by Mitutoyo ENABLED

Order No.

Resolution

Range

Accuracy

Measuring force

Remarks

List

Promo

Stem dia. 3/8", #4-48 UNF Thread 543-792-10

$336.30 $372.40 $336.30 $218.50 $336.30 $372.40 $336.30 $218.50

.00005”/0.001mm .00005”/0.001mm .0001”/0.001mm .0005”/0.01mm .00005”/0.001mm .00005”/0.001mm .00005”/0.001mm .0005”/0.01mm

.5” / 12.7mm .5” / 12.7mm .5” / 12.7mm .5” / 12.7mm .5” / 12.7mm .5” / 12.7mm .5” / 12.7mm .5” / 12.7mm

±.0001” ±.0001” ±.0001” ±.0010” ±.0001” ±.0001” ±.0001” ±.0010”

1.5N or less 2.5N or less 1.5N or less 1.5N or less 1.5N or less 2.5N or less 1.5N or less 1.5N or less

w/ lug back w/ lug-back w/ lug back w/ lug-back w/ flat back w/ flat-back w/ flat back w/ flat-back

$354.00 $392.00 $354.00 $230.00 $354.00 $392.00 $354.00 $230.00

543-796-10 543-793-10 543-783-10 543-792B-10 543-796B-10 543-793B-10 543-783B-10

Order Numbers are subject to change, e.g. 500-196-30 will change to 500-196-32

ABSOLUTE Digimatic Indicator ID-U † Economical, Slim digital indicator. † Large LCD and simple key operation.

† Ideal for installation into measuring devices because of its compact design and long battery life. † Employing the ABSOLUTE linear encoder, the ID-U always displays the spindle ABSOLUTE position from the origin at power-on. Also, unlimited response speed eliminates overspeed errors. † Long stem for mounting.

575-123

Data Management Software by Mitutoyo ENABLED

Order No.

Resolution

Range

Model

Accuracy Measuring force

List

Promo

575-123

$240.35

.0005”/0.01mm 1” / 25.4mm ID-U1025E .0008”

1.8N or less

$253.00

SPC cable – 1m: 905338 2m: 905409

WWW.DGISUPPLY.COM

Dial Indicators / Bore Gages

Series Two Dial Indicators

† Improved impact- and oil-resistant materials are employed in the bezel. The improved shape of the crystal face helps with easier measurement readings. † High-strength, heat-treated stainless steel spindles for longevity. † Scratch- and chemical-resistant hard-coated crystals. † Increased rigidity in the bearing plate for reducing the retracing error (20%), and 4-screw mounting for greater impact resistance. † Inspection certificate included. † No through screw-holes on the frame for high oil- and dust-resistance. The bezel clamp (optional) can be attached either to the right or left side.

2803A-10

Revolutionary stem-bushing design for trouble-free stem clamping (longer clamping range; maximum tightening torque at the clamping point with M5 screw: 150N•cm).

2424A-19

Accuracy First 2.5 Rev/Overall

Order No.

Graduation Range Range/Rev

Type Dial Reading

Force

List

Promo

2358A-10* 2803A-10* 2416A-10* 2424A-19*

$271.70 $197.60 $173.85 $299.25 $174.80

.0001” .0001”

.5”

.01" .01"

w/lug w/lug w/lug w/lug w/lug

0-10

.0001 / .0008 2.0N or less $286.00 .0001 / .0001 2.5N or less $208.00 .001 / .002 1.8N or less $183.00 .001 / .003 2.5N or less $315.00 .0005 / .002 2.5N or less $184.00

.025”

0-5-0 0-100 0-100

.001” .001”

1” 2” 1”

.1" 1"

2776A

.0005”

.05"

0-50

*Jeweled bearing model

Bore Gages

† Carbide-tipped contact points for durability. † The dial indicator is fully protected by a rugged cover. † Optional extension rods can be attached for measuring deep holes. † The grip minimizes the variation of measurements by reducing heat transfer from the operator’s hand.

511-751-20

Order No.

Range Graduation

Anvils

Spacers

List

Promo

With Indicator 511-751-20

$508.25 $494.00 $540.55 $713.45 $805.60 $959.50 $323.00 $330.60 $357.20 $533.90 $626.05 $785.65

.7 - 1.4” 1.4 - 2.5” 2.0 - 6.0” 4.0 - 6.5” 6.5 - 10” 10 - 16” .7 - 1.4” 1.4 - 2.5” 2.0 - 6.0” 4.0 - 6.5” 6.5 - 10” 10 - 16”

9 6

2 $535.00 4 $520.00 4 $569.00

511-752-20 511-753-20 511-754-20 511-755-20 511-756-20

11 (2" sub anvil)

.0001” (2923B-10)

$751.00

7 $848.00 7 $1,010.00

5 (3" sub anvil)

Without Indicator 511-731

9 6

2 $340.00 4 $348.00 4 $376.00 4 $562.00 7 $659.00 7 $827.00

511-732 511-733 511-734 511-735 511-736

Indicator optional Protective Cover optional (21DZA000)

See Digimatic indicators made specifically for bore gages (page 10).

11 (2" sub anvil)

5 (3" sub anvil)

Prices effective October 1 through December 23, 2025

Dial Test Indicators

† One-piece movement assembly for improved durability & impact resistance. † Contact point length shown on dial face. † Certificate of Inspection included. † Shows results from both measuring directions. † Resilient crystal with high resistance to glare, scratches and impact. .000050” / 50µinch model now available!

Contact point length is printed on dial face to avoid accuracy issues

513-404-10E

Standard

Set Configuration

OrderNo.

Range

Graduations

Set Type Face Color

List

Promo Remarks

Inch

Standard

Full set

T set

513-407-10E 513-407-10T 513-401-10E 513-402-10E 513-402-10T 513-403-10E 513-403-10T 513-404-10E 513-404-10A 513-404-10T 513-405-10E 513-405-10T 513-406-10E 513-406-10T 513-409-10E 513-409-10T 513-412-10E 513-412-10T 513-415-10E 513-415-10H

$229.90 Fine grads $269.80 Fine grads

.008” .008”

.00005” .00005” 0.001mm

Basic

White $242.00 White $284.00 Yellow $288.00 White $168.00 White $200.00 White $219.00 White $257.00 Yellow $188.00 Yellow $171.00 Yellow $201.00 Yellow $190.00 Yellow $249.00 White/Yellow $198.00 White/Yellow $219.00 Yellow/White $255.00 Yellow/White $259.00 White $242.00 White $279.00 Yellow $182.00 Yellow $199.00

Stem, .157" DIA. ( 21CAB106 )

Contact point, .118" DIA. carbide

Contact point, .039" DIA. carbide

Full

$273.60 $159.60 $190.00 $208.05 $244.15 $178.60 $162.45 $190.95 $180.50 $236.55 $188.10 $208.05 $242.25 $246.05 $229.90 $265.05 $172.90 $189.05

.14mm

Basic Basic

.03" .03"

.0005" .0005" .0001" .0001"

Full

.008" .008"

Basic

Swivel clamp ( 900322 , for .157" DIA., 3/8" DIA., dovetail)

Inch holding bar (L: 4") (900306)

Full

0.8mm 0.8mm 0.8mm 0.2mm 0.2mm

0.01mm 0.01mm 0.01mm 0.002mm 0.002mm

Basic

Plus Full

Basic set

Basic

Full

E, A set

Contact point, .079" DIA. (Carbide)

.03”/0.7mm .03”/0.7mm

.0005”/0.01mm Basic .0005”/0.01mm Full

Dual dial Dual dial Dual dial Dual dial

0.2mm/.0076" 0.002mm/.0001” Basic 0.2mm/.0076" 0.002mm/.0001” Full

Indicator

Knurled clamp ring

.03" .03"

.0005" .0005" 0.01mm 0.01mm

Basic

Full

Stem, .157" DIA. ( 21CAB106 )

Stem, 3/8" DIA.

1.0mm 1.0mm

Basic Basic

Long stylus Long stylus

Ruby Tip

Metric

513-472-10E 513-479-10E

$178.60 $189.05

.03" .03"

.0005" .0005"

Basic Basic

White $188.00 White $199.00

Full set

Long stylus

T set

Standard (20° tilted face)

Swivel clamp ( 900321 , for ø4mm, ø8mm, dovetail)

Metric holding bar (L: 100mm) (900209)

513-442-10A 513-442-10T 513-442-16A 513-442-16T 513-446-16A 513-446-16T 513-446-10A 513-446-10T 513-443-10A 513-443-10T

$217.55 $246.05 $217.55 $246.05 $290.70 $326.80 $290.70 $326.80 $273.60 $309.70

.06" .06" .06” .06” .06" .06" .06” .06”

.0005" .0005" .0005” .0005” .0005" .0005" .0005” .0005” .0001” .0001”

Basic

White $229.00 White $259.00

Full

Basic

Black Black Black Black

$229.00 $259.00 $306.00 $344.00

Plus set

A set C set (ø 6 Stem)

Full

Basic

Contact point, ø3mm carbide

Long stylus Long stylus Long stylus Long stylus

Stem, ø4mm (21CAB106)

Contact point, ø1mm carbide

Full

Basic

White $306.00 White $344.00 White $288.00 White $326.00

Full

Basic set

.016” .016”

Basic

Full

E set

Contact point, ø2mm (Carbide)

Vertical: dial is on the top of the frame

513-452-10E 513-452-10T 513-453-10E

$208.05 $229.90 $247.95

.03" .03"

.0005" .0005" .0001”

Basic

White $219.00 White $242.00 White $261.00

Indicator

Full

.008”

Basic

H set (ø 6 Stem)

Parallel: dial is on the side of the frame

Knurled clamp ring

(Set No. 902804 ) Stem, ø8mm

513-485-10E

$265.05

0.2mm

0.002mm

Basic

Yellow $279.00

WWW.DGISUPPLY.COM

Specialized Indicators

Calculation-Type Digimatic Indicator ID-C † Calculation-type Digimatic Indicator features both a key lock and parameter lock. † Fast measurement frequency up to 50 per second.

† Improved parameter setting software makes it even easier to set all of the available parameters to determine and upload the proper coefficients for calculation. (optional) 21EZA313

† An analog bar provides easy-to-read values when scanning for Max, Min and TIR Values. † The ABSOLUTE Digimatic indicator performs internal calculations using the formula Ax+B+Cx-1 (assuming spindle displacement as x), while the specified coefficients A, B and C can be set with respect to the purpose of measurement or dimensions of the fixtures. This unique feature allows for reading measurements directly without searching for conversions.

543-342B-10

Data Management Software by Mitutoyo ENABLED

Custom fixture shown

Order No.

Resolution

Range

Accuracy

Measuring Force List

Promo

.00005/.0001/.0005” (0.001/0.01mm) Selectable

543-342B-10

$547.20

.5"/12.7mm ±.00010"/0.003mm 1.5N or less

$576.00

Stem dia. 3/8" #4-48 UNF Thread

SPC cable – 1m: 905338 2m: 905409

Bore Gage ABSOLUTE Digimatic Indicator ID-C

† Hold automatically picks up hole diameter after a sweep. † Bore Gage Digimatic Indicator features both a key lock and parameter lock. † Fast measurement frequency up to 50 per second. † Analog bar provides easy-to-read values when scanning for Max, Min and TIR values. † Up to three sets of master values and upper/lower tolerance values can be stored.

† Go/No-go judgment † Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle ABSOLUTE Position from the origin at power-on. † Improved parameter setting software makes it even easier to set all of the available parameters to determine and upload the proper coefficients for calculation. (optional) 21EZA313

543-312B-10

Data Management Software by Mitutoyo ENABLED

Measuring Force

Installed on optional bore gage probe (page 12)

Order No.

Resolution

Range

Accuracy

List

Promo

.00005/.0001/.0005” (0.001/0.01mm) Selectable

543-312B-10

$547.20

.5"/12.7mm ±.00010"/0.003mm 1.5N or less

$576.00

SPC cable – 1m: 905338 2m: 905409

Peak Hold ABSOLUTE Digimatic Indicator ID-C With Max./Min. Value Holding Function † Peak Hold Digimatic Indicator features both a Key Lock and Parameter Lock. † An analog bar provides easy-to-read values when scanning for Max, Min and TIR Values. † Go/No-go judgment † The maximum, minimum or runout value can be displayed during measurement.

† Fast measurement frequency up to 50 per second. † Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle ABSOLUTE Position from the origin at power-on. † Improved parameter setting software makes it even easier to set all of the available parameters and then determine and upload the proper coefficients for calculation. (optional) 21EZA313

543-302B-10

Order No.

Resolution

Range

Accuracy

Remarks

List

Promo

Stem dia. 3/8", #4-48 UNF Thread 543-302-10

.00005/.0001/.0005" 0.001/0.01mm Selectable

$547.20

.5"/12.7mm ±.00010"/0.003mm w/lug

$576.00

543-302B-10

$547.20

.5"/12.7mm ±.00010"/0.003mm Flat-back

$576.00

Data Management Software by Mitutoyo ENABLED

SPC cable – 1m: 905338 2m: 905409

Prices effective October 1 through December 23, 2025

Borematic

Borematic Quick, spring-loaded lever action/movement

10% OFF

† Titanium-coated measuring pins provide excellent durability and impact resistance while allowing the instrument to measure close to the bottom of blind holes. † Digital display with quick-action lever operation enables quick and easy measurement. † Built-in ABSOLUTE System eliminates the need to set the origin point every time the unit is turned on. The system is immune to over-speed errors, thus increasing the reliability of measurement. † The Digimatic Borematic is compatible with statistical process control systems and measurement support systems. † Built-in tolerance judgment function allows Go/No-go judgment based on user-defined upper and lower limit settings.

Data Management Software by Mitutoyo ENABLED

Individual Gages: includes one digital display unit and one interchangeable measuring head (plus adapter if required)

Order No.

Size Range

Accuracy

Extension Rod

List

Promo

$1,738.50 $1,738.50 $1,738.50 $1,776.50 $1,776.50 $1,776.50 $1,843.00 $2,023.50 $2,023.50 $1,985.50 $2,061.50 $2,090.00 $2,090.00 $2,194.50 $2,318.00

568-461 568-462 568-463 568-464 568-465 568-466 568-467 568-468 568-469 568-470 568-471 568-472 568-473 568-474 568-475

$1,830.00 $1,830.00 $1,830.00 $1,870.00 $1,870.00 $1,870.00 $1,940.00 $2,130.00 $2,130.00 $2,090.00 $2,170.00 $2,200.00 $2,200.00 $2,310.00 $2,440.00

0.275” - 0.350” 0.350” - 0.425” 0.425” - 0.500” 0.50” - 0.65” 0.65” - 0.80”

±5μm ±0.00025 in

100mm ( 952322 )

Technical Data Resolution: 0.001mm or

0.00005in/0.001mm

±5μm ±0.00025 in

150mm ( 952621 )

Display: Response speed: Battery:

LCD

0.8” - 1.0” 1.0” - 1.2” 1.2” - 1.6” 1.6” - 2.0” 2.0” - 2.5” 2.5” - 3.0” 3.0” - 3.5” 3.5” - 4.0” 4.0” - 4.5” 4.5” - 5.0”

Infinite

SR44 (1 pc), 938882 , for initial operational checks (standard accessory) Battery life: Approx. 5,000 hours in continuous use Scale type: Electrostatic capacitance ABSOLUTE encoder Functions Go/No-go judgment, Go/No-go judgment zoom, 2-Point preset, Zero-setting, Data hold, Error alarm, Low battery voltage alert, Data output, Function lock, 330° Rotary display, inch/mm conversion (inch/mm models)

150mm ( 952622 )

±6μm ±0.0003 in

150mm ( 952623 )

Complete Unit Gage Sets: includes several individual gages to cover the overall size range of the set

Order No.

Overall Range Range of Individual Gages

Setting Rings

List

Promo

568-965 568-966 568-967 568-968 568-969

$6,013.50 $6,260.50 $6,545.50 $4,683.50 $5,196.50

0.275” - 0.5”

0.275-0.35”, 0.35-0.425”, 0.425-0.5” 0.35” DIA., 0.425” DIA.

$6,330.00 $6,590.00 $6,890.00 $4,930.00 $5,470.00

0.5” - 1”

0.5-0.65”, 0.65-0.8”, 0.8-1”

0.65” DIA., 0.8” DIA. 1.2” DIA., 1.6” DIA.

1” - 2” 2” - 3” 3” - 4”

1-1.2”, 1.2-1.6”, 1.6-2”

2-2.5”, 2.5-3” 3-3.5”, 3.5-4”

2.5” DIA. 3.5” DIA.

Complete-Unit Set

Interchangeable-Head Sets

Order No.

Overall Range Range of Individual Gages

Setting Rings

List

Promo

568-928 568-929 568-930 568-936

$2,679.00 $3,021.00 $3,695.50 $5,320.00

0.275” - 0.5”

0.275-0.35”, 0.35-0.425”, 0.425-0.5” 0.35” DIA., 0.425” DIA.

$2,820.00 $3,180.00 $3,890.00 $5,600.00

0.5” - 1”

0.5-0.65”, 0.65-0.8”, 0.8-1”

0.65” DIA., 0.8” DIA. 1.2” DIA., 1.6” DIA. 2.5” DIA., 3.5” DIA.

1” - 2” 2” - 4”

1-1.2”, 1.2-1.6”, 1.6-2”

2-2.5”, 2.5-3”, 3-3.5”, 3.5-4”

Interchangeable-Head Set

Includes one digital display unit with several interchangeable measuring heads (and adapters as required) to cover the total size range plus one extension rod

Order Numbers are subject to change, e.g. 500-196-30 will change to 500-196-32

WWW.DGISUPPLY.COM

Holtest

Digimatic Holtest † Titanium-coated measuring pins provide excellent durability and impact resistance while allowing the instrument to measure close to the bottom of blind holes. † Large LCD readout. † Functions available: Presetting, Zero/ABS, Auto power On/Off, Data hold, Data output, Error alarm, Battery replacement alarm. † With ratchet stop for consistent force.

† Measure deep holes by attaching an extension rod (optional). † Setting rings are included in sets, but optional for individual gages. † Supplied in fitted plastic case up to 4”/100mm. Over 4”/100mm supplied in wooden case. † Resolution: .00005”/0.001mm (over 4” models: .0001”/0.001mm)

Digimatic Holtests – Individual Units

Order No.

Range

List

Promo

10% OFF

468-261 468-262 468-263 468-264 468-265 468-266 468-267 468-268 468-269 468-270 468-271 468-272 468-273 468-274 468-275 468-276 468-277 468-278 468-279 468-280 468-281

$1,269.00 $1,269.00 $1,278.00 $1,377.00 $1,377.00 $1,422.00 $1,422.00 $1,458.00 $1,467.00 $1,593.00 $1,593.00 $1,611.00 $1,638.00 $2,133.00 $2,196.00 $2,331.00 $2,412.00 $2,592.00 $2,646.00 $2,745.00 $2,853.00

Digimatic Holtest, .275 - .35" Digimatic Holtest, .35" - .425" Digimatic Holtest, .425 - .5" Digimatic Holtest, 0.5" - 0.65" Digimatic Holtest, 0.65" - 0.8" Digimatic Holtest, 0.8" - 1" Digimatic Holtest, 1.0 - 1.2" Digimatic Holtest, 1.2" - 1.6" Digimatic Holtest, 1.6" - 2.0" Digimatic Holtest, 2" - 2.5" Digimatic Holtest, 2.5" - 3" Digimatic Holtest, 3" - 3.5" Digimatic Holtest, 3.5" - 4" Digimatic Holtest, 4" - 5" Digimatic Holtest, 5" - 6" Digimatic Holtest, 6" - 7" Digimatic Holtest, 7" - 8" Digimatic Holtest, 8" - 9" Digimatic Holtest, 9" - 10" Digimatic Holtest, 10" - 11" Digimatic Holtest, 11" - 12"

$1,410.00 $1,410.00 $1,420.00 $1,530.00 $1,530.00 $1,580.00 $1,580.00 $1,620.00 $1,630.00 $1,770.00 $1,770.00 $1,790.00 $1,820.00 $2,370.00 $2,440.00 $2,590.00 $2,680.00 $2,880.00 $2,940.00 $3,050.00 $3,170.00

Data Management Software by Mitutoyo ENABLED

Measuring Deep Holes An extension rod (optional accessory) can be fitted to provide measurement of deep holes.

Digimatic Holtests – Interchangeable Head Sets

Order No.

Range

List

Promo

468-976 468-977 468-978 468-979 468-980

$2,304.00 $1,872.00 $4,671.00 $5,355.00 $6,291.00

Digimatic Holtest Head Set, 0.275” - 0.5”* $2,560.00 Digimatic Holtest, Head Set, 0.5" - 0.8"* $2,080.00 Digimatic Holtest, Head Set, 0.8" - 2"* $5,190.00 Digimatic Holtest, Head Set, 2" - 4"* $5,950.00 Digimatic Holtest, Head Set, 4" - 8"* $6,990.00

Digimatic Holtests – Complete Unit Sets

Order No.

Range

List

Promo

468-986 468-987 468-988 468-989 468-990

$4,482.00 $4,770.00 $5,409.00 $6,066.00 $7,137.00

Digimatic Holtest, Unit-Set, 0.275" - 0.5"* $4,980.00 Digimatic Holtest, Unit-Set, 0.5" - 1"* $5,300.00 Digimatic Holtest, Unit-Set, 1" - 2"* $6,010.00 Digimatic Holtest, Unit-Set, 2" - 3"* $6,740.00 Digimatic Holtest, Unit-Set, 3" - 4"* $7,930.00

Complete-Unit Set

Interchangeable-Head Set

Prices effective October 1 through December 23, 2025

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36