3M ™ Cubitron ™ 3 Fibre Disc 1182C Carbon steel grinding Grades 60+ & 80+
We tested 3M ™ Cubitron ™ 3 Fibre Disc 1182C 60+ and 80+, and here are the results:
Grade 60+ Up to 53 %
Up to 69 %
More total material removed 1
Faster sustained cut rate 2
1182C, 60+
1182C, 60+
Competitive Shaped Grain Fibre Disc, 60+
Competitive Shaped Grain Fibre Disc, 60+
0
2
4
6
8
10
12
14
16
0
200
400
600
800
100
1200
1400
Sustained Cut Rate (g per cycle)
Total Material Removed (g)
Grade 80+ Up to 55 %
Up to 60 %
Faster sustained cut rate 2
More total material removed 1
1182C, 80+
1182C, 80+
Competitive Shaped Grain Fibre Disc, 80+
Competitive Shaped Grain Fibre Disc, 80+
0
2
4
6
8
10
12
14
0
100
200
300
400
500
600
700
800
900
1.000
Total Material Removed (g)
Sustained Cut Rate (g per cycle)
Total Material Removed: 60+ Carbon Steel: The ‘total material removed’ claim is determined by averaging the amount of metal ground over 100 cycles, approximately 42 minutes of grinding 80+ Carbon Steel: The ‘total material removed’ claim is determined by averaging the amount of metal ground over 70 cycles, approximately 30 minutes of grinding
Sustained Cut Rate: 60+ & 80+ Carbon Steel: The ‘sustained cut rate’ claim is determined from averaging the cut/cycle from cycles 11-50 (40 cycles total, which is approximately 17 minutes of grinding)
Units for carbon steel will be Grams Each cycle for the carbon steel test method = 25.3 seconds of grinding per cycle
8
Powered by FlippingBook