Customer case study Outperformed competitor in stainless steel
+57% Productivity
Country:
Italy
Component: Material: Operation:
Plate
M1.0.Z.AQ, AISI316L, austenitic stainless steel
+43% Tool life
52 mm (2.05 inch), one part through hole and one part blind hole
Machine: Coolant:
Doosan NHP6300
Emulsion 8%, 70 bar (1015 PSI)
Challenge:
Due to the cost of the component, reliability and repeatability were the most important factors for the customer.
Competitor
CoroDrill® DE10
Tool
-
DE10-D1600-160L20-5
Drill tip
-
DE10-1650-160-M5 4334
Sustainability proposition: Using CoroDrill® DE10 leads to a 35% reduction in CO 2 emissions, saving 260 kWh of energy and 200 kg of CO 2 yearly. Result: CoroDrill® DE10 operated with a satisfactory sound level and achieved good chip formation, producing a high-quality hole surface and a hole diameter that met expectations. It outperformed the competition in both productivity and tool life.
55 (180)
v c , m/min (ft/min)
40 (131)
n , rpm
772
1060
0.16 (0.0063)
f n , mm (inch)
0.14 (0.0055)
v f , mm/min (in/min)
108 (4.25)
170 (6.69)
Tool life, holes
180
126
Tool life, m (ft)
9.3 (30.5)
6.6 (21.7)
Tool life, min
55
61
Drill bodies: 2–8xD (CAPP family DS90) Drill tips:
GC2334, GC4334, H10F (DC available in 0.01 mm increments) (CAPP family I290)
Find out more: sandvik.coromant.com/ corodrillde10
Authorized distributor
1-800-923-6255 www.dgisupply.ca/com
C-1040:366 en-US © AB Sandvik Coromant 2025
Powered by FlippingBook