CoroDrill® DE10 Time for change
Redefining plug-and-play
The overlooked potential of exchangeable- tip drills is substantial. It’s time for change.
Introducing CoroDrill® DE10, the new best-performing exchangeable-tip drill for superior productive short-hole drilling in all materials. Featuring the universal -M5 geometry, CoroDrill® DE10 offers seamless plug-and-play functionality and uncompromised performance across a wide range of cutting data.
CoroDrill® DE10 is designed for short-hole drilling between diameters 9.00–17.90 mm (0.354–0.705 inch) across all material groups, offering a large cutting data window with high cutting parameters right from the start. The concept includes cylindrical and cylindrical with flat shank types and offers the unique benefit of a single, versatile geometry that covers all materials.
Excellence in high feeds
40% Feed increase*
CoroDrill® DE10 offers peak performance at high feeds and speeds, leveraging its unique geometry, high-performance grades and robust pre-tension clamping interface. Increase your feed by 40% and watch your productivity and cost efficiency soar. Your CO 2 emissions per operation will also be reduced by around 20%.
-20% CO 2 emissions per operation
*Recorded in reference testing.
Keys for successful drilling
Robustness Robust body, interface and tip for a secure process.
Hole quality Maintains hole quality for longer, even after corner wear.
Plug-and-play Excellent performance in various materials across a wide range of cutting data. No pilot drill required Drilling without a pilot drill reduces inventory and cycle time Productivity High feed capabilities, reducing cost per component and CO 2 emissions.
Tool life Optimized geometry and grades for market-leading tool life in all material groups.
One geometry. No compromises.
Key grip Direct-pressed key grip for improved durability and safety.
Land margin Offers dynamic stability, consistently reduces wear in ductile materials.
The -M5 tip geometry is unique, and offers uncompromised performance in all materials and a wide range of cutting data. In any other exchangeable-tip drill concept, you will need multiple geometries. With this one-size-fits-all design, CoroDrill® DE10 is easy to apply and exceptionally useful for mixed production.
Chisel edge Along with the gash, it creates a perfect balance of strength and low cutting forces.
Point angle Stable and vibration-free engagement in the workpiece. Vital for good centering and hole quality.
Gash For improved clearance in the center and perfect centering capabilities.
Corner reinforcement Superior edge strength for better wear resistance.
Durable tip and body
40% Tool life increase
Featuring an optimized chip flute geometry with two twisted coolant holes, the drill tip of CoroDrill® DE10 stands the test of time, achieving good chip evacuation and hole quality. Coupled with a high-strength drill body with reinforced contact faces, it offers market-leading tool life.
When used with recommended feeds and speeds, CoroDrill® DE10 delivers an average tool life increase of 40% or more*, regardless of the material.
*Recorded against competitors in the customer environment.
Max loosening torque, mounting test DC12.5 mm Max loosening torque, mounting test DC12.5 mm (0.492 inch)
0 0,2 0,4 0,6 0,8 1 1,2 1,4 1,6 1,8 2 2,2 2,4 2,6 2,8 3
3 2.8 2.6 2.4 2.2 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0
CoroDrill® DE10 Competitor 1 Competitor 2
CoroDrill® DE10 Competitor 1 Competitor 2
CoroDrill® DE10 has a higher loosening torque level in general and less reduction in torque overall, improving the drill body tool life.
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95100
Number of reassemblies Number of reassemblies
Familiar design with a new level of security
Fast and easy tip changes, no spare parts needed.
The pre-tension clamping interface of CoroDrill® DE10 is just like the ones you are used to, but with next-level security. This patented solution is the most robust design of its kind.
Trouble-free drilling at high feeds and speeds.
Superior strength and high clamping forces.
Good centering capabilities lead to straighter holes and tighter tolerances.
More drill tips per drill body.
Features and benefits
— High-feed capabilities allow for a higher penetration rate, increasing productivity and reducing cost per hole — Patented pre-tension clamping interface and strong drill tip geometry enable secure and robust drilling — Interface design offers good centering capabilities leading to straighter holes and tighter tolerances — One geometry for all materials and no need for a pilot drill mean less stock inventory — Easy plug-and-play with recommended cutting data — Optimized chip flute geometry with two twisted coolant holes for good chip evacuation and hole quality
Application
— For high-volume hole making across all industries — Typical components are heat exchanger plates, automotive components, shafts, pumps and valves, flanges and structural I & H steel beams — H9/H10 hole tolerance — Can be used in a variety of drilling applications
ISO application areas
Grade and geometry recommendations
-M5 geometry One geometry for all materials.
Grade GC4334
Grade GC2334
— Tough, fine-grained substrate with high Cr content and a thin, multi-layer PVD coating (AlTiCrN) produced with Zertivo® technology — For high reliability and improved resistance against chipping and flaking on land margin
— Tough, fine-grained substrate with high Cr content and PVD coating (AlTiN) produced with Zertivo™ technology — High reliability with improved edge security offers resistance against built-up edge and chipping
Wear resistance
Toughness
Product range
Drill bodies
Drill diameter, mm (inch)
Shank type
Drill depth (×DC)
9.00–9.9 (0.354–0.390) 10.00–17.90 (0.394–0.705)
Cylindrical (mm and inch)
3, 5, 8
Cylindrical with flat according to ISO 9766 (mm and inch)
3, 5, 8
Drill tips
Drill dimension, mm (inch)
Geometry Grade Application
9.00–17.90 (0.354-0.705) DC available in 0.1 mm increments 9.00–17.90 (0.354-0.705) DC available in 0.1 mm increments
-M5
GC4334 ISO P, M, K, N, S, H
-M5
GC2334 ISO M, S, P, K, N, H
Productive sustainability
CoroDrill® DE10 sets the stage for sustainable manufacturing. By allowing for higher cutting parameters and faster metal removal, it significantly reduces CO 2 emissions. Its robust design ensures predictable wear patterns and maximizes tool longevity, minimizing waste and supporting responsible manufacturing goals.
Higher productivity
Minimize energy consumption
Longer tool life
Workplace safety
Drill tip mounting key
— Included in each drill box — One key covers the complete drill range — Great visibility during the assembly process — Hardened stainless steel with premium feel and high durability — Easily recyclable — Order no: 5680 300-01
Plastic handle option (ordered separately) — Improves ergonomics and avoids the risk of carbide splintering — Transparent for good visibility — Collars for guidance and improved assembly — Easily recyclable — Order no: 5680 300-20
Customer case study Outperformed competitor in stainless steel
+57% Productivity
Country:
Italy
Component: Material: Operation:
Plate
M1.0.Z.AQ, AISI316L, austenitic stainless steel
+43% Tool life
52 mm (2.05 inch), one part through hole and one part blind hole
Machine: Coolant:
Doosan NHP6300
Emulsion 8%, 70 bar (1015 PSI)
Challenge:
Due to the cost of the component, reliability and repeatability were the most important factors for the customer.
Competitor
CoroDrill® DE10
Tool
-
DE10-D1600-160L20-5
Drill tip
-
DE10-1650-160-M5 4334
Sustainability proposition: Using CoroDrill® DE10 leads to a 35% reduction in CO 2 emissions, saving 260 kWh of energy and 200 kg of CO 2 yearly. Result: CoroDrill® DE10 operated with a satisfactory sound level and achieved good chip formation, producing a high-quality hole surface and a hole diameter that met expectations. It outperformed the competition in both productivity and tool life.
55 (180)
v c , m/min (ft/min)
40 (131)
n , rpm
772
1060
0.16 (0.0063)
f n , mm (inch)
0.14 (0.0055)
v f , mm/min (in/min)
108 (4.25)
170 (6.69)
Tool life, holes
180
126
Tool life, m (ft)
9.3 (30.5)
6.6 (21.7)
Tool life, min
55
61
Drill bodies: 2–8xD (CAPP family DS90) Drill tips:
GC2334, GC4334, H10F (DC available in 0.01 mm increments) (CAPP family I290)
Find out more: sandvik.coromant.com/ corodrillde10
Authorized distributor
1-800-923-6255 www.dgisupply.ca/com
C-1040:366 en-US © AB Sandvik Coromant 2025
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8Powered by FlippingBook